littlelf smart AppHow do I setup my wifi camera by EZ mode?
Connect your Wi-Fi camera using EZ mode pairing, with preparation steps and troubleshooting tips
Preparation Before Setup
- Please download the "Littlelf Smart / Owltron" app on your smartphone.
- Confirm the network frequency the camera supports and connect your phone to the appropriate network (2.4 GHz or 5 GHz).
- Power on the camera.
EZ Mode Network Pairing Steps
Link your smartphone to a Wi-Fi network.
Power up the camera and wait until the light blinks.
Open the app, tap the "+" in the upper right-hand corner, then tap "Add Device".
Select the camera model you wish to connect, tap the "⇄" icon, change to EZ Mode, and select "Confirm that the indicator is blinking".
Input the Wi-Fi password and tap "Next".
The app will search for the device automatically. Wait a while; the indicator will turn blue/green/white and stop blinking, and the connection succeeds.
Warm Tips
- Ensure you're connected to the network frequency supported by the camera.
- Enable your phone's location permission to detect nearby Wi-Fi, or manually enter the correct Wi-Fi name.
- If your router has IPv6 enabled, we recommend that you disable IPv6.
- Check if the camera is in network setup mode; if unsure, click customer service support to check.
- Ensure the app has been granted all necessary permissions; if uncertain, click customer service support to check.
- If, after the above checks, the camera still fails to configure or the indicator light displays an unusual status (such as a steady red / blue-green light, briefly flashing and then turning off, showing purple or yellow, etc.), be sure to get in touch with us immediately via customer service support.
For more help, see Wi-Fi connection problems.