littlelf Smart Home Camera User Manual

Thank you for choosing the littlelf Smart Home Camera. Please read this Quick Start Guide carefully before using, and keep it in good condition.

In the Box

• 1 Camera
• 1 Power Adapter
• 1 Power Cable
• 3 Expansion Bolts
• 1 Mounting Sticker
• 1 Quick Start Guide
• 3 Screws
• 3M Adhesive

Product Appearance

The camera features a Microphone, LENS, IR LED, Status Light, Reset, Speaker, Micro SD Slot, and Micro USB Input.

Product parameters

Product Instructions

1. App download and installation

2. Account registration

Open the "Littlelf smart" APP, click "Agree" on the privacy policy and then register an account with a mailbox; after registering successfully, log in to the Littlelf smart APP.

3. Connecting mode

Power the camera on and wait for the camera to start until the red light flashes (about 40–60 seconds), and then start the connection of the Littlelf camera.

3.1 QR Code Mode

Definition: Use the camera to scan the QR code on the mobile phone, which contains net-pairing info.

Steps: Click Net Pairing Mode → Choose QR Code → Click next step → Enter Wi-Fi password (passwords do not support @, #, %, &) → Continue → Scan the QR code with the camera → Align the QR code with the lens of the camera about 15–20 cm away → Click "Hear the beep" → Wait for the connection to finish.

3.2 EZ Mode

Definition: After connecting the phone to 2.4G Wi-Fi, enter the name and the correct password of the Wi-Fi to match the network.

Steps: Click Net Pairing Mode → Choose EZ Mode → Click next step → Enter Wi-Fi password (passwords do not support @, #, %, &) → Confirm → Connecting → Successful connection after you hear the sound.

4. Other functions

4.1 View the live video on a PC

Here is the link for viewing on a PC; please enter it to log in: https://ipc.ismartlife.me/login

1. Open the Littlelf Smart APP on your phone.
2. Click "Me" in the main interface.
3. Click the scanner in the top right corner.
4. Use this scanner to scan the QR code on the link, then you can log in to view the live video.

4.2 View the videos saved on the SD card on a PC

Please note that the video format on the SD card is ".media", which cannot be played by a general player. Please contact our email [email protected]. We will send you the installation package of the "IPC player". You can download and install it, then open the videos with this player.

Operation Guide

1. Interface introduction

When accessing the real-time video interface, you can zoom the video interface, switch to play sound, capture High-Definition (HD) pictures, view the real-time video in full screen, snapshot real-time pictures and launch an intercom, save pictures and record video to the local album, and select the HD mode of the camera. The interface includes: Camera Name, Parameters Settings, Camera Sound Switch, Full Screen, Fold Hidden, Photo Snapshot, Motion Detection, Video Record, and Audio (press to talk).

2. Detection alarm messages

The shortcut to check detection alarm messages. Click All messages — there is a video viewing portal in each alarm message. If cloud storage is purchased, it will jump to the event recording recorded by cloud storage; if cloud storage is not purchased and there is an SD card recording, it will jump to the event recording recorded by the SD card; if there is neither a cloud storage recording nor an SD card recording, it will jump to real-time video.

FAQ & Feedback

You can search all the device-related FAQs here. If all the above solutions can't solve your problem, you can also submit the question by clicking "Unresolved" to submit issues — then you will get the answer within 24 hours.

Troubleshooting

1. The APP cannot be registered successfully

1. Please tick the software service agreement and privacy policy.
2. Please check whether the verification code is in the spam mail.
3. During installation, please allow the app to obtain your location and all permissions; the system will automatically arrange the best server.
4. If the above solutions still aren't effective, please uninstall and reinstall the app, then re-register according to the permissions allowed by the APP.

2. Unable to connect to the network

A) Unable to connect to Wi-Fi

1. Please enable the DHCP of the router.
2. Please make sure the camera is not in the blacklist in the MAC settings of the router.
3. Turn off the 5GHz Wi-Fi in the router. (Note: please contact the router manufacturer if you can't turn off the 5G Wi-Fi.)
4. After connecting to the 2.4GHz Wi-Fi, please check whether your mobile phone can access the Internet.
5. After the network is normal, reset the camera and reconnect.

B) Wi-Fi password reason

1. Check the Wi-Fi password of the connected Wi-Fi.
2. Check whether the entered Wi-Fi password has a space or special characters (@, #, %, &).

C) Disconnected 5G Wi-Fi, unable to connect to Wi-Fi

1. Turn off the 5G network and keep the 2.4G network. Disconnect the router and then restart the camera.
2. The Wi-Fi name cannot contain "5G".

3. Camera matches the Wi-Fi successfully, but can't record the camera's voice

1. Reset the camera, then power off and reconnect the camera (only a reset can remove existing data).
2. Put the phone close to the camera and router when it is connecting.
3. Please turn off the 5GHz Wi-Fi.

4. No pop-up message for motion detection

1. Open the permission settings in the phone settings to allow push notifications.
2. After some Android phones exit the background, it is not possible to receive the alarm push information.
3. Turn off motion detection in the APP.
4. SMS and email reminders are not supported at this time.

5. Motion detection messages prompt frequently

1. If the motion detection sensitivity is too high, light changes will cause an alarm.
2. Reduce the sensitivity of alarms (low level is recommended).

6. After inserting the SD card, it displays as damaged

1. Before inserting the SD card, disconnect the power. Cut off power before plugging in the card.
2. The SD card must be formatted before use. You can format it in the App conveniently.
3. We recommend purchasing an SD card directly from the manufacturer.

7. Watch videos with the same camera on different devices

1. The main account can share the video to other accounts (limited quantity), but the shared accounts only have the right to snapshot and record video.
2. The main account name and password can also be used on other devices to view the video and use any function.

8. The scenarios for the reset key

1. Reset will erase information.
2. Wi-Fi exception before connecting to the camera.
3. Wi-Fi password error.
4. Wi-Fi drop.
5. Replace with new Wi-Fi.

9. What to do if there is no solution in Q&A

You can log on to the Littlelf website www.littlelf.com for feedback online.

Legal Declaration

All rights reserved. The copyright of the instructions is owned by Shenzhen Skyline Security Co., Ltd. Others are not allowed to plagiarize or embezzle it.

Trademarks statement. Littlelf trademark ownership is owned by Shenzhen Skyline Security Co., Ltd. Other trademarks covered by this manual are owned by their respective owners.

Disclaimer. The products (including hardware, software, firmware, etc.) described in this manual should be provided in accordance with the "status quo". As for the possibility of defects, errors, or failures, Littlelf does not provide any form of express or implied warranty, including but not limited to merchantability or the assurance that they are applicable to a particular purpose. If it involves Internet services when using the product described in this manual, you may be affected by the instability of various links, and may be affected by computer viruses, hacker attacks, system instability, and other incompatible factors that cause the software to fail to achieve the desired results. For personal information or data leakage or loss caused by incorrect operation or other reasons, you should strengthen your personal information protection and take all the relevant risks yourself. When using this product, please strictly follow the applicable law. You agree that this product shall be used only for civil use and shall not be used to infringe upon the rights of third parties, in medical / safety devices or other applications which may cause life danger, or in weapons of mass destruction, chemical or biological weapons, nuclear explosions, or any unsafe nuclear energy use or dangerous or inhumanitarian use. Any loss or liability arising from the above use will be at your own expense. If the above content conflicts with the applicable law, the law shall prevail.

After-Sales Service Support

If you encounter any problems in the process of using the product, you can get support in the following ways:

• Visit the official website: www.littlelf.com for online support.
• Send your problems to email: [email protected].
• Call the after-sales service hotline: 0086-755-28483693.

Requirements for Power Supply

This product is suitable for a DC5V1A power adapter only.

Operating requirements:

• Please transport, use and store the camera within the allowable humidity and temperature range.
• Please avoid rain water and other liquids flowing into the camera to avoid damage to internal components.
• Do not use in strong lightning weather to avoid damage to internal components.
• Please pay attention to the maintenance of the camera. If you need to clean it, please wipe it with a dustless cloth.

Related Articles

• Set up the camera with a QR code
• Set up the camera with EZ mode
• How do I view SD card video on a computer?
• What SD card does the camera support?
• Why can't the camera connect to a 2.4GHz Wi-Fi network?