Logolittlelf smart App
Logolittlelf smart App
Homepage
Top Questions
Wi-Fi Connection Problems
Account Access & Management
Camera Troubleshooting
Storage & Recordings Setting
Camera Features
User Manual

How can I reconnect to the internet after changing providers/router/WiFi?

Reset the camera and add it back to the app after switching network provider, router, or Wi-Fi

If you've changed your network provider, the camera needs to be reset to connect to the new network.

1. Resetting the Camera

Press and hold the reset button for 5 seconds until you hear a tone and see the light flash. This will allow you to reconnect the camera to your app.

  • Indoor camera: There is a small button on the back of the camera. Press it for 3–5 seconds until the indicator light flashes red.
  • Outdoor camera: Open the rubber cover on the camera and press and hold the reset button for about 5 seconds. When you see the white light flashing and hear the voice prompt, you can connect the camera again.

2. Reconnecting the Camera

After resetting, the indicator light will flash. Follow these steps to add the camera back to the app:

Open the app and tap the "+" in the top right corner, then select "Add Device."

Choose your camera model.

Confirm that the indicator is blinking and proceed to the next step.

Select your Wi-Fi network, enter your Wi-Fi name and password, and tap "Next."

Use the camera to scan the QR code directly on your phone (15–20 cm), adjusting your phone slightly for optimal scanning.

When you hear the prompting voice, tap "I Heard a Prompt" and wait.

The app will confirm the successful addition of the camera when the light turns solid green/blue/white.

Please note: Ensure that you reconnect the camera to the same Home to avoid any complications, especially if you have multiple Homes set up. If you haven't set up a Home name, simply add the camera back, and your cloud service records will remain intact.

If the camera still won't enter setup mode, see What if the camera isn't in the network setup mode? or Wi-Fi connection problems.

Table of Contents

1. Resetting the Camera
2. Reconnecting the Camera